B2B Market Research: Methods, Steps and What to Decide With It
B2B market research explained for owners, sales, marketing and product leaders: the methods, a step-by-step plan, market and industry analysis, and how to act on it.

B2B market research is the work of finding out who your business buyers are, what they need, who else is selling to them and where the market is heading, so you can make a decision with evidence instead of instinct. The part most teams struggle to keep up is the ongoing part: tracking competitors, pricing, hiring and demand shifts week after week. That is the part we built Rival Shark to automate, and it delivers a structured report in minutes, with next steps at the end, rather than days of manual digging.
This guide is for business owners, sales leaders, marketers and product managers who need to use research, not commission it. It covers what B2B research is, how it differs from consumer research, the methods and when each fits, a six-step plan, how to do market and industry analysis, and how to turn findings into sales, marketing and product moves.
Key Takeaways
-
B2B market research gathers and analyzes information about buying companies, the people who decide inside them, competitors and industry trends, to support a specific decision.
-
B2B differs from consumer research because purchases are larger, involve fewer buyers and several decision makers, and take longer, so you must cover more than one voice.
-
Combine methods: interviews and surveys tell you why buyers choose, while competitor, pricing and industry monitoring tells you what the market is doing right now.
-
Start from the decision, not the data. Write down what you will do differently depending on the answer.
-
For the competitor and market side, Rival Shark’s self-serve reports give sourced figures and urgency-rated actions, and a free industry snapshot is a quick place to start.
Table of Contents
-
Turning research into sales, marketing and product decisions
-
Doing the competitor and market side without an analyst team
What B2B market research actually is
In B2B, your customer is an organization. The person who signs, the person who uses the product and the person who controls the budget are often three different people. Research in this setting means gathering and analyzing information about those buyers, your competitors and the industry around them.
That sounds broad, so tie it to decisions. Research earns its cost when it answers questions like these:
-
Is there enough demand in this segment to justify a new product or a new sales territory?
-
Which competitors are we really losing deals to, and why?
-
Can we raise prices, or is a rival about to undercut us?
-
Which messages resonate with the finance buyer versus the operations buyer?
-
Where is the market getting crowded, and where is it open?
If a study cannot change one of those answers, it is trivia. The most common failure in B2B research is a thick report that nobody acts on.
How B2B research differs from consumer research
The methods overlap, but the buyer does not. An OpenStax marketing textbook chapter describes business purchases as typically larger, with fewer buyers and longer, more complex decision cycles than consumer purchases. It also notes that B2B demand is derived (it depends on what the buyer’s own customers want) and that personal selling plays a bigger role than mass marketing.
GreenBook’s explainer on business-to-business research adds practical consequences: multiple people take part in the decision, spending is high, technical requirements matter and customer bases are relatively small.
For you, this means three things:
-
Small samples are normal. If you sell to a few hundred companies in a niche, twenty good interviews can be more valuable than a thousand-person survey.
-
One respondent is never the whole account. A practitioner article from Vernon Research Group points out that surveying only one role can miss important viewpoints in a buying team.
-
Competitors matter more. With few buyers and long cycles, every lost deal is expensive. Knowing exactly how rivals price, position and hire is a core part of the research, not an add-on.
The main B2B market research methods
Methods split into two families. Primary research collects data directly from your target audience. Secondary research uses information that already exists: public records, industry data, competitor materials and published reports. Most good projects use both.
Primary methods: ask the buyers
In-depth interviews. One-on-one conversations, usually by phone or video, are the workhorse for reaching busy executives and specialists. Vernon Research Group notes that in-depth phone interviews suit hard-to-reach B2B executives and experts, where focus groups may be impractical. Use interviews when you are exploring: why customers switched, what the buying process looked like, what nearly stopped the deal.
Surveys. HubSpot’s guide to B2B research recommends surveys for learning about company profiles, needs and challenges, product use, decision processes and industry perceptions. Use them when you already know the questions and need to measure how common an answer is across a defined group.
Win/loss interviews. Talking to buyers who chose you and buyers who chose someone else, soon after the decision, is one of the highest-value techniques in B2B because it ties research directly to revenue.
A useful rule from the Qualtrics guide to B2B research: open-ended qualitative methods such as interviews suit exploratory questions, and structured quantitative methods suit specific, defined questions. Many teams run interviews first to find the right hypotheses, then a survey to test which ones hold across the market.

Secondary methods: read the market
Competitor analysis. Tracking competitors’ pricing, positioning, product launches, hiring patterns and customer sentiment shows you where the market is moving before it shows up in your pipeline. A job posting for a new regional sales team, for example, is a signal of expansion. A pricing page edit is a signal of how a rival values its offer.
Market sizing and demand research. Estimating how many companies could buy from you and how much they might spend. Published sizing figures are often dated, so treat them as a starting point and check them against what you hear from buyers.
Industry and trend analysis. Looking at how an industry is structured, who holds share, what regulation or technology is changing and which segments are growing.
Pricing research. Testing what buyers will pay, either through interviews and surveys or by comparing what the market already charges.
Which method for which question
| Question you need answered | Best-fit method | Typical output |
|---|---|---|
| Why do we win or lose deals? | Win/loss interviews | Ranked reasons by buyer role |
| What do buyers need that we do not offer? | In-depth interviews, then survey | Needs list with frequency |
| What are competitors doing right now? | Competitor monitoring | Alerts on pricing, launches, hiring |
| Is this market big and growing enough? | Market sizing, industry analysis | Segment size, growth signals |
| Where is a market saturated or open? | Market and local scoring | Ranked locations or segments |
| What should we charge? | Pricing comparison, buyer survey | Price range with evidence |
Notice that three of the six rows are about what the market and competitors are doing. That kind of research is continuous by nature: a one-off report goes stale as soon as a competitor changes its price.
A six-step plan for a B2B research project
Most published guides land on the same sequence, and it works. Here it is with the places it tends to go wrong.

Step 1: Start with the decision
Write one sentence: “We will decide whether to ___ by ___, and the answer changes if we learn ___.” GreenBook recommends defining the research problem, the intended influence on the business, the product attributes that matter and the key competitors before research begins. Where it goes wrong: starting with a topic (“the SaaS market”) instead of a choice (“enter the mid-market segment or not”).
Step 2: Define the audience
HubSpot suggests defining target respondents by geography, industry, company size and leadership level. Be specific about roles too: the economic buyer, the day-to-day user and the technical evaluator often want different things. Where it goes wrong: interviewing only the friendliest champion.
Step 3: Choose the methods
Match methods to the question using the table above, and fit them to your time and budget. Layering qualitative and quantitative work gives you both nuance and validation. For the competitor and market side, we recommend starting with a Rival Shark report: it pulls competitor pricing, positioning, launches, hiring patterns and sentiment into one structured analysis, so your interviews can focus on what only buyers can tell you.
Step 4: Collect the data
For interviews, prepare an open guide and record with permission. For market data, keep a log of every source with its date. Where it goes wrong: mixing data from different years without noting it, so a stale figure sits next to a fresh one.
Step 5: Analyze
Look for patterns across roles and segments, then rank them by how much they affect revenue. A finding that appears in many interviews and in competitor behavior is far stronger than one seen in a single place. This is the step where automation helps most: our reports present sourced figures and attach an urgency rating to every recommended action, so you start from a ranked list instead of a pile of notes.
Step 6: Put findings to work, and repeat
Assign each finding an owner and a date. Then schedule the refresh. Markets move, so research that is done once and filed is a snapshot of the past.
B2B market analysis: sizing the opportunity
Market analysis answers a narrower question than “research”: is this market worth entering or expanding in, and how do we win it? A typical analysis covers:
-
Market size in three layers. Total addressable market (everyone who could buy), serviceable market (the part you can reach with your product and channels) and the share you can realistically win.
-
Buyer fit. Do target companies actually have the problem you solve, and do they budget for it?
-
Price range. What buyers already pay for similar or adjacent solutions.
-
Competitive landscape. Who is established, and which segments are weakly served.
-
Limiters. Regulation, procurement rules or technical standards that slow adoption.
For US markets, official data gives you a solid base. The Census Bureau’s County Business Patterns series reports the number of establishments, employment and payroll by industry and employment size, which is useful for counting how many companies of a given size operate in a place. To define the industry you are counting, use NAICS codes, the classification system US statistical agencies use to group businesses by activity.
Official counts tell you how many companies exist. They do not tell you which ones are expanding, cutting prices or hiring salespeople this month. That live layer is what our Local / Online Market Intelligence reports add, including local market saturation and demand shifts, and it is built for local and multi-location teams as well as online-first businesses (see our page on local market intelligence).
B2B industry analysis: reading the structure
Industry analysis steps back from individual rivals to ask how profitable and how stable an industry is. The CFA Institute’s industry and competitive analysis module describes a standard sequence: define the industry’s boundaries, survey total sales, growth rates and profitability, determine market shares and trends for the key players, then apply Porter’s Five Forces and PESTLE (political, economic, social, technological, legal and environmental) analysis.
Harvard Business School’s Institute for Strategy and Competitiveness explains that Porter’s Five Forces determine an industry’s competitive structure and profitability. The five are rivalry among existing competitors, the threat of new entrants, the bargaining power of suppliers, the bargaining power of buyers and the threat of substitutes. The same source stresses that structure is not fixed: technology, regulation and competitors’ choices, such as a new pricing approach, keep reshaping it.
That last point is why industry analysis is not a one-time exercise. If a new entrant arrives or a buyer group consolidates, your position changes. Our Industry Intelligence reports track those shifts, and the free industry snapshot is the fastest way to see what an industry view looks like before you commit to anything.
Turning research into sales, marketing and product decisions
Research only matters when it changes what people do on Monday. Here is how each role in your company can use the same findings.
Sales leaders. Convert competitor and win/loss findings into battle cards: how a rival is priced, where it is weak, what buyers say about it. Give reps talk tracks for each member of the buying committee, since the economic buyer and the technical evaluator ask different questions. Our platform includes sales battle cards and win/loss intelligence for this purpose (see the page for sales and revenue leaders).
Marketing professionals. Use buyer research and share-of-voice data to decide which claims to lead with and which channels to fund. If competitors are loud on one theme, you may win by owning a different one. Our page for marketing and growth leaders covers that workflow.
Product managers. Tie roadmap items to documented buyer requirements and to competitor launches, and watch for signals such as hiring patterns that hint at a rival’s next move. See how this works for product and strategy leaders.
Business owners. Use market and competitor reports to decide where to expand, when to adjust pricing and which segment deserves the next hire. Our page for small business owners is written for that situation.
A published GreenBook case study shows how far one research program can reach: an enterprise provider reframed its value messaging around the criteria economic buyers ranked highest, gave sales role-specific talk tracks, adjusted pricing and packaging against quantified willingness to pay, reprioritized roadmap items and sharpened positioning against the two most-shortlisted vendors. Win rates improved over the following year.
Doing the competitor and market side without an analyst team
The interview and survey side of B2B research needs people: you have to talk to buyers. The competitor and market side does not need to be a manual slog. Collecting pricing pages, job posts, reviews, launches and local market data by hand, then assembling them into something a decision maker can read, is days of work, and it has to be repeated to stay current.
Rival Shark is self-serve. You describe your business and objectives, and the platform produces a structured report in minutes that ends with clear next steps. Each action carries an urgency rating, figures are sourced, and your data is protected. There is no analyst team to hire or brief. If you want the detail on how this compares with doing the work by hand, see our page on analyst-led and manual competitive research.
Where to start
Rival Shark offers various plans to fit your needs. You can view the available plans and start with a 7-day free trial. For more details, visit the pricing page. If you prefer to explore before subscribing, the free industry snapshot provides an initial overview of your industry. For access to the complete set of reports, visit our competitive intelligence software page.
A practical first week looks like this: write the one decision you face, pull a competitor and industry report to see where you stand, then book five buyer interviews to test what the report suggests. By Friday you will have both the market view and the buyer view, and a ranked list of actions.
FAQ
What is the difference between B2B market research and B2B market analysis?
Market research is the whole activity of gathering evidence about buyers, competitors and trends. Market analysis is one output of it: sizing the opportunity, understanding demand and judging competitors to decide whether and how to compete in a market. Research feeds analysis, and analysis feeds a decision.
Which B2B research method should I use first?
Start with whichever method answers your decision fastest. If you need to know what competitors and the market are doing, begin with competitor and industry reports. If you need to know why buyers choose you, begin with win/loss interviews. Then layer the other so you have both the market picture and the buyer voice.
How many people do I need to interview?
B2B customer bases are relatively small, so samples are usually small too. What matters more than the number is coverage of roles: include the economic buyer, the user and the technical evaluator, and keep interviewing until the answers start repeating.
How often should I repeat B2B market research?
Competitor, pricing and industry tracking should run continuously, because rivals change prices, launch products and hire all the time. Buyer research such as interviews and surveys can follow a slower rhythm, such as quarterly or around major decisions like a launch or a pricing change.
Sources
-
OpenStax, Principles of Marketing: The Business-to-Business (B2B) Market
-
Harvard Business School Institute for Strategy and Competitiveness: The Five Forces
-
GreenBook case study: B2B Market Research for an Enterprise Solutions Provider
Recommended
See your market's saturation score
Run a local market report in minutes. Card required, 7-day free trial, no charge until it ends.
Keep reading